309-7664 Front And Center Floating Oil Seal For Farm , Construction
, Earthmoving
Floating Oil Seal Application
-- Excavator, Bulldozer, tractor, cranes, forklift, Heavy truck, backhoe
-- Undercarraige, hydraulic motor, travel motor, gearbox axle,
wheel hub,tunneling
-- For OEM Komatsu, CAT, Shantui, Sany, Kubota, SK Kobelco, JCB,
Volvo, Hitachi,
John Deere, Fiat Allis, New Holland, Commins, Terex,
BOB-Cat,DOOSAN, Case IH... etc.
Floating Oil Seal Parameters:
- The metal rings
| Surface finish / Roughness | ≤ Ra0.2μm |
| Face finish | ≤ Ra0.015μm |
| Pressure | ≤ 0.3MPa |
| Forged/Casting line speed | 2m / s & 3m / s |
| Hardness | 58 - 62 HRC |
| Temperature | -100 ~ 200 °C |
- The rubber o ring
| Shore hardness | 60 ° ~ 65 ° |
| Minimum tensile strength | 11MPa |
| Minimum elongation at break | 300% |
| Flexible change | ± 5 ° |
| permanent deformation | ≤ 12% |
Method of installation:
1. Using specialized tools installation: The pressure will apply to
the O-ring directly. As shown, the special tool is mounted between
the metal floating ring and the rubber ring, toward the seat hole,
the rubber ring is evenly pressed into the hole.
2. Other installation methods: One auxiliary O-ring is fixed
between the conical ring surface of the floating oil seal and
sealing O-ring (as shown). The ring of the floating oil seal is
applied uniformly by pressure and the auxiliary O-ring braces the
sealing O-ring to ensure the other correct mounting positions.
Floating Oil Seal Details
Komatsu, CAT, Hitachi, Kubota, Kobelco, Danapac, Goetze,
Trelleborg...
| model# | Bottom roller | Carrier Roller | Front idler | Final Drive |
| PC60 | 110-30-00085 | 140-30-00040 | 141-30-00610 | |
| PC200 | 20Y-30-00040 | 20Y-30-00090 | 10Y-30-00100 | 150-27-00026 |
| E200B | 1M8746 | 8E5609 | 5P0204 | |
| E320 | 9W7220 | 8E5609 | 9W7225 | |
| D60 | 141-30-00616 | 141-30-00616 | 141-30-00610 | 141-27-00015 |
| D85ESS-1 | 154-30-00832 | 154-30-00832 | 154-30-00832 | 192-27-00022 |
| D3 | 9E6690 | 9E7216 | 9E6691 | |
FAQ
-You're the factory?
Yes, we are a 13 years factory in Hubei Province, China
- How do you control the quality?
Each seal is 100% inspected in every process before exported
- How long to make the shipment?
In three days with stocks, 15-30 days according to the order qty.
- Can i buy one to test?
Yes, we offer a trial order and sample order for your Quality
Evaluation.
