Hydraulic cylinder seal kits are used to seal the gap between different parts of the hydraulic cylinder. The function of hydraulic cylinder seal kits is to prevent oil leakage, to assure the working pressure of the hydraulic system, to maintain its power.
Boom Cylinder seal kit is, as the name suggests, fitted into the boom cylinder.
There are regularly three cylinders for the excavator, boom cylinder, arm cylinder, bucket cylinder.
Arm cylinder is the top one, and it's usually be called as top cylinder;
The bucket cylinder is the one that connects and controls the bucket.
Boom cylinder is the one (or the two) near the cabin. Usually, there is one piece boom cylinder for the small excavator under 10-tun; the bigger excavator's two pieces boom cylinders. But there is an exception too when the driver will remove one piece for a special purpose, say at some particular working place, it is convenient to work by one cylinder. Soft remind: all refit job should be operated by an experienced technician.

When you open and repair the cylinder, please follow below operation:

1. Take off the cylinder from the machine.

2. Remove the head assembly nad the rod assembly from the stick cylinder group.

3.If it always happens that the seal kit not perform well soon after it fitted, there maybe problem of the cylinder assembly itself. It is better to check the cylinder assembly whether need to change it.

4.Meansure the seal kits before fitting.

5.Install the seals.

After fix the cylinder assy, test it first before reinstall the stick culinder group on the machine.

Hydraulic cylinders get their power from pressurized hydraulic fluid, which is typically oil. And the seal kits are developed to used to prevent the oil leaking, thus the clinders could work properly. Besides Boom cylinder seal kit, we also prodive Arm cylinder seal kit and Bucket cylinder seal kit, and other seal kits as Main pump seal kit, Hydraulic pump seal kit, Regulater valve seal kit, Plunger pump seal kit, O ring box, Gear pump seal repair kit, Travel motor seal kit, Breaker hammer seal kit, Swing motor seal kit, Lever seal kit, Pilot valve seal kit/PPC seal, Adjuster seal kit, Center joint seal kit, Turing joint seal kit, Servo valve seal kit, Control valve seal kit...

Guangzhou Sonka Engineering Machinery Co., Ltd.

Loion: Guangzhou, China

Business scope:excavator spare parts

Fit for machine model brand: Komatsu, Hitachi, Kobelco, Kato, , Daewoo, Sumitomo, Hyundai, Volvo

Start

Sonka Company grew out of Global Engineering Machinery.

Time back in 2009, a spare parts shop named GLOBAL ENGINEERING MACHINERY established in Guangzhou City. Soon but stably, it sold its spare parts to more than 30 cities in domestic China in the same year, with the fame spreading far and wide, for the good product quality and service.

At that time the shop mainly sold mainly in seal and seal kits lines: excavator seal kits, loader seal kits, bulldozer seal kits, breaker seal kits and other construction machinery-related seals.

Growing

To meet customer’s growing needs on seal kits, in 2013, a new company named Guangzhou Huanqiu Seal Technology Co. LTD was set up to handling the seal factory. Factory manufactures all kinds of seals for construction machinery.

It then lay solid foundations for oncoming development.

HQPA stands for High Quality Product Assurance!

Expand

With rich experience and established technique, customers are satisfied with our seal kits for high quality and good performance.

And we would like to share these seal kits with the world outside China. In the year of 2014, we creates the Guangzhou Sonka Engineering Machinery Co. Ltd, a branch trading company, to deal with all the oversea business.

Prospect

In the year 2020, Sonka Company will upgrade our brand. We will set up Management Service Center in the oversea market to promote our uniform brand all over the world.